Knowledge

A humid environment can reduce the reliability of CNC machine tools, especially in humid environments with high acid gas, which can cause corrosion of printed circuit boards and co

The voltage fluctuation of the power grid should be controlled between+10% and -15%. However, in China, the power supply has significant fluctuations, poor quality, and hidden dist

CNC machine tool hard table metal indexable face milling cutters are mainly used for milling flat surfaces. When rough milling, choose a smaller milling cutter diameter because the

The demand for CNC machine tools in China is increasing day by day, and the development of CNC machine tools has promoted the innovation and upgrading of functional components in C

High speed, precision, composite, intelligent, and green are the overall trends in the development of CNC machine tool technology, achieving gratifying results in practicality and

CNC machine tools were invented by American inventor John Parsons in the 20th century. With the development of electronic information technology, the world machine tool industry ha

Generally, acceptance is carried out in two stages. 1. Pre acceptance The purpose is to inspect and verify whether the machine tool can meet the processing quality and productivity

The self diagnosis of CNC systems can not only display fault alarm information on CRT displays, but also provide machine tool parameters and status information in the form of multi

By relying on the CNC system's ability to quickly process data, multiple and fast signal acquisition and processing are carried out on the erroneous parts, and then the diagnos

The electrical fault diagnosis of CNC machine tools includes three stages: fault detection, fault judgment and isolation, and fault localization. The first stage of fault detection

1. Initialization reset method: In general, if a system alarm is caused by an instantaneous fault, hardware reset or switching on and off the system power can be used to clear the

1. The feed unit of the machine tool has been modified or changed; 2. The zero offset (NULLOFFSET) of each axis of the machine tool is abnormal; 3. Abnormal Backlash in the axial d